Having trouble connecting your Brother printer to a new WiFi network can be frustrating, to know more about brother printer won't connect to new wifi. but let's try to troubleshoot it step by step:
Check Network Settings on Printer: Make sure your Brother printer is powered on and check its display panel. Navigate through the settings to ensure it's trying to connect to the correct WiFi network. If not, you may need to reset the network settings and re-enter the correct WiFi credentials.Restart Printer and Router: Sometimes, a simple restart can resolve connectivity issues. Turn off your printer and router, wait for a minute, and then turn them back on. Once both devices have restarted, try connecting the printer to the WiFi network again.Verify WiFi Password: Ensure that you're entering the correct WiFi password. WiFi passwords are case-sensitive, so make sure the caps lock key is off and you're entering the password correctly.Move Closer to the Router: If possible, move the printer closer to the WiFi router during the setup process. This can help ensure a stronger and more stable connection.Check for Interference: Electronic devices such as cordless phones, microwaves, and other WiFi-enabled devices can cause interference with your WiFi signal. Try moving these devices away from your printer and router to see if it improves connectivity.Update Printer Firmware: Ensure that your Brother printer has the latest firmware installed. Manufacturers often release firmware updates to address bugs and improve device performance, including WiFi connectivity.Use WPS (Wi-Fi Protected Setup): If your router supports WPS, you can try using this feature to connect your printer to the WiFi network. Check your printer's manual for instructions on how to use WPS.Reset Printer Network Settings: As a last resort, you can reset your printer's network settings to factory defaults and then set it up again from scratch. Refer to your printer's manual for instructions on how to perform a network reset. to know more about brother printer not connecting to wifi.If you've tried these steps and are still unable to connect your Brother printer to the new WiFi network, you may want to contact Brother's customer support for further assistance. They may have additional troubleshooting steps specific to your printer model.